DRV601_15 Datasheet, PDF (1/19 Pages) Texas Instruments – DIRECTPATH™ STEREO LINE DRIVER, ADJUSTABLE GAIN

DRV601
www.ti.com......................................................................................................................................... SLOS553C – JANUARY 2008 – REVISED SEPTEMBER 2009
DIRECTPATH™ STEREO LINE DRIVER, ADJUSTABLE GAIN
Check for Samples: DRV601
FEATURES
1
•2 External Gain Setting Resistors
• Space Saving Package
– 20-Pin, 4 mm × 4 mm Thin QFN, Thermally
Optimized PowerPAD™ Package
• Ground-Referenced Outputs Eliminate
DC-Blocking Capacitor
– Reduce Board Area
– Reduce Component Cost
– Improve THD+N Performance
– No Degradation of Low-Frequency
Response Due to Output Capacitors
• Wide Power Supply Range: 1.8 V to 4.5 V
• 2 Vrms/Ch Output Voltage into 600 Ω at 3.3 V
supply
• Independent Right and Left Channel
Shutdown Control
• Short-Circuit and Thermal Protection
• Pop Reduction Circuitry
APPLICATIONS
• Set-Top Boxes
• CD / DVD Players
• DVD-Receivers
• HTIB
• PDP / LCD TV's
DESCRIPTION
The DRV601 is a stereo line driver designed to allow the removal of the output dc-blocking capacitors for
reduced component count and cost. The device is ideal for single supply electronics where size and cost are
critical design parameters.
The DRV601 is capable of driving 2 Vrms into a 600-Ω load at 3.3 V. The device has external gain setting
resistors, that support a gain range of -1V/V to -10V/V, and line outputs that has ±8-kV IEC ESD protection. The
device has independent shutdown control for the right and left audio channels.
The DRV601 is available in a 4 mm × 4 mm Thin QFN package.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
DIRECTPATH, PowerPAD, DirectPath are trademarks of Texas Instruments.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2009, Texas Instruments Incorporated