THC63LVD1023B Datasheet, PDF (5/26 Pages) THine Electronics, Inc. – 160MHz 67Bits LVDS Transmitter

THC63LVD1023B _Rev.3.0_E
Pin Name
ASYNC=L ASYNC=H
Pin #
Type
Description
The use of these multi-function depends on the setting
of MODE<1:0> or ASYNC.
ASYNC=H(MODE<1:0>=Don’t care.)
H: Cross point switching enable.
L: Cross point switching disable.
MODE2
(See Fig.5)
ASYNC=L
27
IN
MODE<1:0>=HH(Single-in/Single-out Mode)
H: Distribution function enable.
L: Distribution function disable.
MODE<1:0>=HL(Single-in/Dual-out Mode)
H: DDR (Double Edge input) function enable.
L: DDR (Double Edge input) function disable.
MODE3
Input port switching function enable when
MODE<1:0>=HL(Single-in/Dual-out Mode).
23
IN
H or Open: Port switch disable.
L: Port switch enable.
Asynchronous function enable.
ASYNC
28
IN
H: Asynchronous mode enable.(MODE<1:0>=Disable)
L: Asynchronous mode disable.(MODE<1:0>=Enable)
/PDWN
H: Normal operation,
30
IN
L: Power down (all outputs are Hi-Z)
PRBS ^*2
PRBS (Pseudo-Random Binary Sequence) generator
is active in order to evaluate eye patterns when
MODE<1:0> = LL (Dual-in/Dual-out mode) or
31
IN _ASYNC=H
H: PRBS generator is enable.
L: Normal Operation
Reserved
32
IN Must be tied to GND.
N/C
29, 33, 109
Must be Open.
VCC
3, 13, 82, 93,
104, 113,
125, 137
Power Power Supply Pins for TTL inputs and digital circuitry.
GND
4, 14, 83, 94,
105, 114,
126, 138
Ground Ground Pins for TTL inputs and digital circuitry.
LVCC
43, 49, 55,
61, 67
Power Power Supply Pins for LVDS Outputs.
LGND
37, 42, 48,
54, 60, 66, 72
Ground
Ground Pins for LVDS Outputs.
PVCC
35, 74
Power Power Supply Pins for PLL circuitry.
PGND
34, 36, 73, 75 Ground Ground Pins for PLL circuitry.
*2: Setting the PRBS pin high enables the internal test pattern generator. It generates Pseudo-Random Bit Sequence of
2²³-1. The generated PRBS is fed into input data latches, formatted as VGA video like data, encoded and serialized
into TXOUT output. This function is normally to be used for analyzing the signal integrity of the transmission
channel including PCB traces, connectors, and cables.
Copyright©2011 THine Electronics, Inc.
5/26
THine Electronics, Inc.