RFPT400 Datasheet, PDF (3/5 Pages) TEMEX – Low cost SMD Temperature Compensated Crystal Oscillator for indoor wireless

9.0
Line
9.1
9.2
9.3
9.4
9.5
PIN CONNECTIONS
Parameter
Pin 1
Pin 2
Pin 3
Pin 4
NOTE
Description
Control voltage, Vc
Ground
Output
Supply voltage, Vs
For correct operation a 10nF supply de-coupling capacitor should be placed next to the device,
see recommended PCB pattern. If an AC coupled output is required a 10nF should be placed in
series with output pad 3
-----
10.0
Line
10.1
10.2
10.3
MARKING
Parameter
Type
Line 1
Line 2
Description
Laser marked
R and manufacturing identifier (X XX) (see model drawing diagram)
Pad 1/static sensitivity identifier (∆), abbreviated part number (0000), device date code (YW)
(see model drawing diagram)
-----
11.0
Line
11.1
11.2
MANUFACTURING INFORMATION
Parameter
Description
Reflow
Solder reflow processes as per profile attached (see reflow profile diagram). Solderability:
MIL-STD-202, method 208, category 3
Packaging description Part numbers with suffix 'T' will be supplied on tape and reel
-------
Page 3