LNO800E1 Datasheet, PDF (2/5 Pages) TEMEX – Low Noise Oscillator

Low Noise Oscillator series
LNO800 E1
OCSO @800 MHz
Specifications
1.0 Environmental conditions
Line Parameter
Test Condition
Typ. Value Guaranteed
1.1 Operating temperature range
Standard
Extended
0 to +50
-25 to +60
1.2 Start-up temperature range
With degraded performances
-40 to +60
1.3 Storage temperature range
-40 to +85
1.4 Shock
As per MIL-PRF-28800F, Class 3, test equipment
1.5 Random vibration
As per MIL-PRF-28800F, Class 3, test equipment
1.6 G-sensitivity
On each axis
1
<2
Unit
°C
°C
°C
ppb/g
2.0 Electrical interface
Line Parameter
2.1 Power supply voltage
2.2 Load impedance
2.3 Control input voltage
2.4 Control input impedance
Test Condition
Pin 7 - Operating range
- Absolute maximum
Pin 1, 50 all phases
Pin 6
Pin 6
Typ. Value
-
Guaranteed
+5 ± 0.25
< +6
<1.3:1
0.5 to +4.5
> 10
Unit
V
VSWR
V
k
3.0 Performances
Line Parameter
3.1 Nominal frequency
3.2 Frequency calibration
3.3 Frequency stability
3.4 Long term stability
3.5 Power consumption
3.6 Warm-up time
3.7 Frequency tuning
3.8 Slope
3.9 Output power
3.10 Output impedance
Test Condition
Definition
Initial calibration @ 25°C
On standard temperature range
On extended temperature range
1^st year
10 years
- At warm-up
- Steady state, at 25°C
1 ppm with reference to frequency
reached after 1 hour of continuous
operation at -25°C
Monotone
Positive slope
Sine wave into 50  load
At 800MHz  1MHz
Typ. Value Guaranteed
800
0.2
< 0.5
-
< 3
< 4
-
< 1
< 6
2.0
< 2.5
1.0
<1.5
-
<3
Unit
MHz
ppm
ppm
ppm
ppm
W
W
minutes
10
> 6
ppm
5
>3
ppm/V
-
+82
dBm
<2.0:1
VSWR
LNO800 E1 – revision A – June 2016
2/5
www.rakon.com
Rakon reserves the right to modify herein specifications and information when necessary
to provide optimum performance and cost