LNO800E1 Datasheet, PDF (1/5 Pages) TEMEX – Low Noise Oscillator

Low Noise Oscillator series
LNO800 E1
OCSO @800 MHz
Specific request can be addressed to RAKON [e-mail]
Product Description
LNO800 E1 is a low noise and low power OCVCSO (Oven Controlled,
Voltage controlled, SAW Oscillator) at 800MHz, powered with a low
voltage +5V power supply.
It is designed for lab environment (test equipment, shelter, ground
based military equipment, etc.).
The 800MHz signal is generated from a 400MHz fundamental
frequency, followed by a low noise frequency doubler.
LNO800 E1 is available in a tiny 25.4 x 22 x 12.7 mm³ SMD package,
specially designed to be soldered through reflow process.
Features
 Excellent phase noise performance (typical values) :
o - 137dBc/Hz @ 1 kHz offset
o - 160dBc/Hz @ 10 kHz offset
o - 167dBc/Hz noise floor
Applications
 Instrumentation (test equipment, simulator)
 Ground based military equipment as per MIL-PRF-28800F, Class 3
LNO800 E1 – revision A – June 2016
1/5
www.rakon.com
Rakon reserves the right to modify herein specifications and information when necessary
to provide optimum performance and cost