LNO500D1 Datasheet, PDF (1/5 Pages) TEMEX – Low Noise Oscillator

Low Noise Oscillator series
LNO 500 D1
OCSO @ 500 MHz
Specific request can be addressed to RAKON [e-mail]
Product Description
LNO 500 D1 is a low noise and low G vibration isolated OCVCSO (Oven
Controlled Voltage Controlled SAW Oscillator) at 500 MHz, phase-
lockable on an external 10 MHz reference.
LNO 500 D1 provides excellent phase noise performance, and is
specially designed for airborne environment. The SAW oscillator is
suspended with vibration and shock absorbers included.
LNO 500 D1 is available in a 70mm x 70mm x 34.75mm package.
Three operating modes are available, through Control Input signal:
 Free running
Control Input = Not connected
 Voltage controlled Control Input = DC Voltage
 Phase Lock Loop Control Input = 10 MHz Reference
Features
 Excellent phase noise performance (typical value in free running) :
o - 142 dBc/Hz @ 1 kHz offset
o - 168 dBc/Hz @ 10 kHz offset
o - 180dBc/Hz noise floor
 BIT Status: Ready or Alarm
Applications
 Airborne radars
LNO 500 D1 - Revision C – March 2014
1/5
www.rakon.com
Rakon reserves the right to modify herein specifications and information when necessary
to provide optimum performance and cost