TCM809 Datasheet, PDF (2/4 Pages) TelCom Semiconductor, Inc – 3-PIN UP RESET MONITORS

PRELIMINARY INFORMATION
3-PIN µP RESET MONITORS
TCM809
TCM810
ABSOLUTE MAXIMUM RATINGS*
Supply Voltage (V_CC to GND) ................................ +6.0V
RESET, RESET ............................ – 0.3V to (V_CC + 0.3V)
Input Current, V_CC.. ..................................................20mA
Output Current, RESET, RESET .............................20mA
dV/dt (V_CC) .......................................................... 100V/µS
Operating Temperature Range ............... – 40°C to +85°C
Power Dissipation (T_A ≤ 70°C)
SOT-23B-3 (derate 4mW/°C above +70°C) ... 230mW
Storage Temperature Range ................ – 65°C to +150°C
Lead Temperature (Soldering, 10 sec) ................. +260°C
*This is a stress rating only and functional operation of the device at these
or any other conditions above those indicated in the operational sections of
the specifications is not implied. Exposure to Absolute Maximum Rating
Conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS: V_cc = 5V, T_A = Operating Temperature Range unless otherwise noted.
Symbol Parameter
Test Conditions
Min Typ Max Unit
I_CC
V_TH
V_OL
V_OH
V_OL
V_OH
NOTES:
V_CC Range
Supply Current
Reset Threshold
Reset Threshold Tempco
T_A = 0°C to +70°C
T_A = – 40°C to +85°C
TCM8xxL/M: V_CC < 5.5V
TCM8xxR/S/T: V_CC < 3.6V
(Note 2)
TCM8xxL: T_A = +25°C
T_A = – 40°C to +85°C
TCM8xxM: T_A = +25°C
T_A = – 40°C to +85°C
TCM8xxT: T_A = +25°C
T_A = – 40°C to +85°C
TCM8xxS: T_A = +25°C
T_A = – 40°C to +85°C
TCM8xxR: T_A = +25°C
T_A = – 40°C to +85°C
V_CC to Reset Delay
Reset Active Timeout Period
(Note 2)
V_CC = V_TH to (V_TH – 100mV)
RESET Output Voltage Low
(TCM809)
RESET Output Voltage High
(TCM809)
RESET Output Voltage Low
(TCM810)
TCM809R/S/T: V_CC = V_TH min, I_SINK = 1.2mA
TCM809L/M: V_CC = V_TH min, I_SINK = 3.2mA
V_CC > 1.0V, I_SINK = 50µA
TCM809R/S/T: V_CC > V_TH max, I_SOURCE = 500µA
TCM809L/M: V_CC > V_TH max, I_SOURCE = 800µA
TCM810R/S/T: V_CC = V_TH max, I_SINK = 1.2mA
TCM810L/M: V_CC = V_TH max, I_SINK = 3.2mA
RESET Output Voltage High
(TCM810)
1.8 < V_CC < VTH min, I_SOURCE = 150µA
1. Production testing done at T_A = +25°C, over temperature limits guaranteed by design.
2. RESET output for TCM809, RESET Output for TCM810.
1.0
1.2
—
—
4.56
4.50
4.31
4.25
3.04
3.00
2.89
2.85
2.59
2.55
—
—
140
—
—
—
0.8 V_CC
V_CC – 1.5
—
—
0.8 V_CC
—
—
24
17
4.63
—
4.38
—
3.08
—
2.93
—
2.63
—
30
20
240
—
—
—
—
—
—
—
—
5.5
V
5.5
60
µA
50
4.70
V
4.75
4.45
4.50
3.11
3.15
2.96
3.00
2.66
2.70
— ppm/°C
—
µsec
560 msec
0.3
V
0.4
0.3
—
V
—
0.3
V
0.4
—
V
PIN DESCRIPTION
Pin No.
(SOT-23B-3)
1
2
Symbol
GND
RESET (TCM809)
2
RESET (TCM810)
3
V_CC
5-16
Description
Ground
RESET output remains low while V_CC is below the reset voltage threshold, and
for 240msec (140msec min.) after V_CC rises above reset threshold.
RESET output remains high while V_CC is below the reset voltage threshold,
and for 240msec (140msec min.) after V_CC rises above reset threshold.
Supply voltage (Typ. +3.0V to +5.0V)
TELCOM SEMICONDUCTOR, INC.