TC1426 Datasheet, PDF (1/6 Pages) TelCom Semiconductor, Inc – 1.2A DUAL HIGH-SPEED MOSFET DRIVERS

1 _TC1426
TC1427
TC1428
1.2A DUAL HIGH-SPEED MOSFET DRIVERS
FEATURES
GENERAL DESCRIPTION
2
s Low Cost
s Latch-Up Protected: Will Withstand 500 mA Reverse
Output Current
s ESD Protected ................................................... ±2 kV
s High Peak Output Current ........................ 1.2A Peak
s High Capacitive Load Drive
Capability ...................................... 1000pF in 38nsec
s Wide Operating Range ........................... 4.5V to 16V
s Low Delay Time ...................................... 75nsec Max
s Logic Input Threshold Independent of
Supply Voltage
s Output Voltage Swing to Within 25mV of
Ground or V_DD
s Low Output Impedance ........................................ 8Ω
APPLICATIONS
s Power MOSFET Drivers
s Switched Mode Power Supplies
s Pulse Transformer Drive
s Small Motor Controls
s Print Head Drive
PIN CONFIGURATIONS
NC ¹
8 NC
NC ¹
8 NC
NC ¹
8 NC
IN A 2
7 OUT A IN A 2
7 OUT A IN A 2
7 OUT A
TC1426CPA
GND 3
6 VDD
TC1427CPA
GND 3
6 VDD
TC1428CPA
GND 3
6 VDD
IN B 4
5 OUT B IN B 4
5 OUT B IN B 4
5 OUT B
2, 4
7, 5
2, 4
7, 5
2
7
INVERTING
NC = NO CONNECTION
NON-INVERTING
4
5
The TC1426/27/28 are a family of 1.2A dual high- speed
drivers. CMOS fabrication is used for low power consump-
tion and high efficiency.
These devices are fabricated using an epitaxial layer to
effectively short out the intrinsic parasitic transistor respon-
3 ^{sible for CMOS latch-up. They incorporate a number of other}
design and process refinements to increase their long-term
reliability.
The TC1426 is compatible with the bipolar DS0026, but
only draws 1/5 of the quiescent current. The TC1426/27/28
are also compatible with the TC426/27/28, but with 1.2A
peak output current rather than the 1.5A of the TC426/27/28
devices.
4 ^{Other compatible drivers are the TC4426/27/28 and the}
TC4426A/27A/28A. The TC4426/27/28 have the added
feature that the inputs can withstand negative voltage up to
5V with diode protection circuits. The TC4426A/27A/28A
have matched input to output leading edge and falling edge
delays, tD1 and tD2, for processing short duration pulses in
the 25 nanoseconds range. All of the above drivers are pin
compatible.
The high-input impedance TC1426/27/28 drivers are
5 ^{CMOS/TTL input-compatible, do not require the speed-up}
needed by the bipolar devices, and can be directly driven by
most PWM ICs.
This family of devices is available in inverting and non-
inverting versions. Specifications have been optimized to
achieve low-cost and high-performance devices, well-suited
for the high-volume manufacturer.
NC ¹
IN A 2
GND 3
IN B 4
8 NC
NC ¹
TC1426COA ^{7 OUT A IN A 2}
6 VDD GND 3
5 OUT B IN B 4
8 NC
NC ¹
7 OUT A IN A 2
TC1427COA
6 VDD GND 3
5 OUT B IN B 4
8 NC
7 OUT A
TC1428COA
6 VDD
5 OUT B
ORDERING INFORMATION
Part No.
Package
6
Temp. Range
2, 4
7, 5
INVERTING
NC = NO CONNECTION
2, 4
7, 5
NON-INVERTING
2
7
4
5
TC1426COA
TC1426CPA
8-Pin SOIC
8-Pin Plastic DIP
0°C to +70°C
0°C to +70°C
FUNCTIONAL BLOCK DIAGRAM
V+
Ï· 2.5mA
Ϸ 500µA
TC1426 INVERTING
TC1427 NONINVERTING
TC1428 INVERTING/NONINVERTING
TC1427COA
TC1427CPA
TC1428COA
TC1428CPA
8-Pin SOIC
8-Pin Plastic DIP
8-Pin SOIC
8-Pin Plastic DIP
0°C to +70°C
0°C to +70°C
7
0°C to +70°C
0°C to +70°C
NONINVERTING INVERTING
OUTPUT
OUTPUT
INPUT
GND
(TC1427)
(TC1426)
NOTE: TC1428 has one inverting and one noninverting driver.
Ground any unused driver input.
TELCOM SEMICONDUCTOR, INC.
TC1426/7/8-8 10/11/96
4-207
8