408-4219 Datasheet, PDF (6/6 Pages) TE Connectivity Ltd – PRO-CRIMPER III Hand Crimping

408-4219
8. DIE REPLACEMENT
Customer-replaceable parts are shown in Figure 8. Spare parts or the die assembly should be stocked and
controlled to prevent lost time when die replacement is necessary.
In addition a PRO-CRIMPER III Hand Crimping Tool Repair Kit 679221-1 is available. The repair kit includes a
replacement nut and a variety of pins, rings, screws, and springs.
Order replaceable parts through your TE Representative, or call 1-800-526-5142, or send a facsimile of your
purchase order to 1-717-986-7605, or write to:
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
9. REVISION SUMMARY
Since the previous release of this instruction sheet, the following changes were made:
 Updated document to corporate requirements
 Deleted duplicate Section 6 and renumbered
 Changed dimensions in Figure 8
1
1.27 ±0.06
[.050 ±.0025]
3
4.57 ±0.23
[.180 ±.009]
4
5.31 ±0.13
[.209 ±.005]
Weight: 227 g [8 oz.]
ITEM
1
2
3
4
5
2
5
11.63
[.458]
CUSTOMER-REPLACEABLE PARTS
PART NUMBER
DESCRIPTION
318432-2
INDENTER, Wire
318430-2
ANVIL, Wire
318431-3
INDENTER, Insulation
318429-3
ANVIL, Insulation
679231-1
PIN, Die Retaining
Figure 8
47.62
[1.88]
QTY PER ASSEMBLY
1
1
1
1
4
Rev C
6 of 6