408-9884 Datasheet, PDF (5/6 Pages) TE Connectivity Ltd – Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools

408-9884
3. Remove all lubrication and accumulated film from the dies by immersing the dies in a suitable
commercial degreaser.
8.2. Visual Inspection
1. Inspection of the tool and dies should be made on a regular basis to ensure that they have not
become worn or damaged.
2. Make sure that the proper die retaining screws are properly secured.
3. Inspect the crimping chambers of the die assembly for flattened, chipped, worn, or broken areas. If
damage or abnormal wear is evident, the dies must be replaced. Refer to Section 9.
9. REPLACEMENT AND REPAIR
Available separately, repair kit 679221-1 includes a replacement nut and a variety of pins, rings, screws, and
springs. If the dies are damaged or worn excessively, they must be replaced. Order through your
representative, or call 1-800-526-5142, or send a facsimile of your purchase order to 717-986-7605, or write to:
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
10. REVISION SUMMARY
Revisions to this instruction sheet include:
 Changed company name and logo
Rev D
5 of 6