408-8579 Datasheet, PDF (5/5 Pages) TE Connectivity Ltd – Securely tighten both screws with the appropriate screwdriver.

408-8579
7. REPLACEMENT
These crimping die assemblies are inspected before
shipment. It is recommended that the dies be
inspected immediately upon arrival at your facility to
ensure that the dies have not been damaged during
shipment.
Order replacements (or send for evaluation and repair)
through your local Tyco Electronics Representative, or
call 1-800-526-5142, or send a facsimile of your
purchase order to 1-717-986-7605, or write to:
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
8. REVISION SUMMARY
Since the previous release of these instructions, the
TE Connectivity logo has been applied.
Blade
Anvil
Spindle
Figure 6
Rev C
5 of 5