408-9786 Datasheet, PDF (4/6 Pages) TE Connectivity Ltd – Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.

408-9786
5. INSPECTION/MAINTENANCE
DANGER
Disconnect power supply before performing
maintenance, adjustments, inspections, and
STOP
repairs.
These instructions have been approved by Design,
Production, and Quality Control Engineers to provide
documented maintenance and inspection procedures.
Through Tyco Electronics Test Laboratories and the
inspection of production assembly, the procedures
described herein have been established to ensure
quality and reliability of the crimping die assemblies.
Customer-replaceable parts are listed in Figure 2. A
complete inventory should be stocked and controlled
to prevent lost time when replacement of parts is
necessary.
5.1. Crimp Inspection (Figure 5)
NOTE
The accompanying procedure is included as an aid
to the tool operator ONLY. It is not intended to serve
i
as a quality control procedure for qualifying finished
crimps on SOLISTRAND Terminals or Splices.
Rev D
Figure 5
4 of 6