408-9227 Datasheet, PDF (3/4 Pages) TE Connectivity Ltd – Application and Maintenance for Crimping Die Assemblies

SUGGESTED PLUG GAGE DESIGN FOR
INSULATION BARREL CRIMP
Crimping
Chamber
“F”
Dim.
408-9227
Crimping
Chamber
GO
NO-GO
Dim.
Dim.
SUGGESTED PLUG GAGE DESIGN FOR
WIRE BARREL CRIMP
GO
Dim.
GO Element Must Pass
Completely Through the
Crimping Chamber
NO-GO
Dim.
NO-GO Element May Enter
Partially, But Must Not Pass
Completely Through the
Crimping Chamber
Crimping
Chamber
GO Element Must Pass
Completely Through the
Crimping Chamber
NO-GO Element May Enter
Partially, But Must Not Pass
Completely Through the
Crimping Chamber
DIE ASSEMBLY
PART NUMBER
58268-1
58268-2
GAGE ELEMENT DIMENSIONS
INSULATION BARREL CRIMP
WIRE BARREL CRIMP
GO
NO-GO
GO
NO-GO
1.473-1.491
[0.0580-0.0587]
1.829-1.847
[0.0720-0.0727]
1.872-1.880
[0.0737-0.0740]
1.981-1.989
[0.0780-0.0783]
1.829-1.847
[0.0720-0.0727]
2.184-2.202
[0.0860-0.0867]
2.024-2.032
[0.0797-0.0800]
2.134-2.141
[0.0840-0.0843]
Figure 3
“F” DIM.
4.32
[0.170]
Rev C
3 of 4