408-4389 Datasheet, PDF (2/2 Pages) TE Connectivity Ltd – Crimp Height Gage

4. MAINTENANCE AND INSPECTION
This gage must be kept clean and calibrated on a
scheduled basis to maintain the integrity of the
measurement process. Refer to Figure 3.
Gage Calibration
Note: Not to Scale
9.525±0.013
[.3750±.0005]
Nest
408-4389
The crimp height gage should be covered with a light
film of oil to prevent corrosion and stored in a clean,
dry area.
5. REVISION SUMMARY
Revisions to this instruction sheet include:
• Changed company name and logo
15.672+0.000/-0.010
[.6170+.0000/-.0004]
Spanner
15.418+0.010/-0.000
[.6070+.0004/-.0000]
Figure 3
Rev C
2 of 2