114-6061 Datasheet, PDF (14/14 Pages) TE Connectivity Ltd – Single Connector Attachments

114- 6061
6. VISUAL AID
The illustration below shows a typical application of CHAMP .050 Series I Blindmate SCA--2. This illustration
should be used by production personnel to ensure a correctly applied product. Applications which DO NOT
appear correct should be inspected using the information in the preceding pages of this specification and in the
instructional material shipped with the product or tooling.
SOLDER FILLETS MUST BE EVENLY
FORMED AROUND BOARDLOCKS
AND CONTACT TINES WITH NO
VISIBLE CRACKS
PLUG AND RECEPTACLE
MUST NOT BE DAMAGED
IN ANY WAY
CORRECT CONFIGURATIONS
AND POSITIONS MUST BE USED
14 of 14
PLUG AND RECEPTACLES MUST BE
BOTTOMED WITH EACH OTHER TO
COMPLETE CIRCUITRY
FIGURE 17. VISUAL AID
PLUG AND RECEPTACLE
MUST BE VISUALLY
SEATED ON THE PC BOARD
Rev D