114-6061 Datasheet, PDF (1/14 Pages) TE Connectivity Ltd – Single Connector Attachments

CHAMP* .050 Series I Blindmate
Plug and Receptacle
Single Connector Attachments (SCA)- 2
Application Specification
114- 6061
26 JUL 11 Rev D
NOTE
i
All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters. Unless
otherwise specified, dimensions have a tolerance of +0.13 and angles have a tolerance of +2_. Figures and
illustrations are for identification only and are not drawn to scale.
1. INTRODUCTION
This specification covers the requirements for application of CHAMP .050 Series I Blindmate plug and
receptacle SCA--2 for printed circuit (pc) board application. These plug and receptacles are available in 20, 40,
and 80 positions and contain through--hole contacts or compliant pin contacts on 1.27 centerline spacing. The
plugs are available in vertical and straddle mount; and the receptacles are available in right--angle, vertical,
press--fit vertical, extended height press--fit vertical, and extended height vertical. These connectors are fully
compatible with CHAMP .050 Series I SCA--1 board--to--board connectors.
The plugs and receptacles contain boardlocks to provide additional stability when placed on the pc board. End
cavities are marked with a number to provide circuit identification. The plug and receptacles may be placed on
the pc board by hand or automatic application tooling.
When corresponding with personnel, use the terminology provided in this specification to facilitate your
inquiries for information. Basic terms and features of this product are provided in Figure 1.
Vertical
Plug
Straddle Mount
Plug
Through- Hole
Contacts
Contact Position
Number Marking
Right- Angle
Receptacle
Extended Height Vertical
Receptacle
Contact Position
Number Marking
Vertical
Receptacle
Boardlock
Press- Fit Vertical
Receptacle
Figure 1
Compliant
Pin Contacts
E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1--800--722--1111 This controlled document is subject to change.
PRODUCT INFORMATION 1--800--522--6752
For latest revision and Regional Customer Service,
visit our website at www.te.com
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
1 of 14
LOC B