408-2281 Datasheet, PDF (12/12 Pages) TE Connectivity Ltd – Crimping Die Assemblies

408-2281
Die
Assy
2280035-1
Gage Element
Wire Barrel Section
GO
NO-GO
R (Radius)
(max)
Insulation Sealing Section
GO
NO-GO
R (Radius)
(max)
C
(Exposed Length)
W
Tip Width
(max)
9.550-9.558 9.802-9.804 8.13 16.205-16.213 16.609-16.612 8.08
[.3760-.3763] [.3859-.3860] [.320] [.6380-.6383] [.6539-.6540] [.318]
9.91
[.390]
16.15
[.636]
2844425-1
7.518-7.526
[.2960-.2963]
7.769-7.772
[.3059-.3060]
7.62
[.300]
16.205-16.213 16.609-16.612
[.6380-.6383] [.6539-.6540]
8.08
[.318]
9.91
[.390]
16.15
[.636]
2844430-[ ]
6.197-6.205
[.2440-.2443]
6.372-6.375
[.2509-.2510]
▲Low Pressure Crimp Die Set
6.73
[.265]
13.818-13.825 14.221-14.224
[.5440-.5443] [.5599-.5600]
Figure 7 (End)
6.88
[.271]
9.91
[.390]
13.77
[.542]
Figure 8
8. REVISION SUMMARY
Revisions to this instruction sheet include:
 Added Crimping Die Assemblies 2844425-1, 2844430-1, and 2844430-2 to Table 1.
 Revised Table 2 to present most up-to-date information.
 Added Crimping Die Assemblies 2844425-1, 2844430-1, and 2844430-2 to Figure 6.
 Added Crimping Die Assemblies 2844425-1, 2844430-1, and 2844430-2 to Figure 7.
 Added ▲Low Pressure Crimp Die Set notation to all PN 314964-1 Die Assembly entries.
Rev CK
12 of 12