S07K130GS2 Datasheet, PDF (42/46 Pages) TDK Electronics – Leaded varistors, StandarD series

Leaded varistors
StandarD series
3.4 Trimmed leads (non-standard)
Varistors with cut leads available upon request.
Lead length tolerances:
Straight leads
Crimped leads
Minimum lead length
+/1.0 mm
+/0.8 mm
3.5 mm
Figure 6
B722*
Please read Cautions and warnings and
Important notes at the end of this document.
Page 42 of 46