B57342V5103H060 Datasheet, PDF (4/23 Pages) TDK Electronics – NTC thermistors for temperature measurement

Temperature measurement and compensation
SMD NTC thermistors, case size 0603 (1608)
B573**V5
Automotive series
Reliability data
Tests of SMD NTC thermistors are based on AEC-Q200 Rev-D. The parts are mounted on
standardized PCB.
Test
Pre- and
post-stress
electrical test
High temperature
exposure
(storage)
Temperature
cycling
Biased humidity
Operational life
External visual
Physical
dimensions
Resistance to
solvents
Mechanical shock
Vibration
Standard
Test conditions
Resistance at: 25 °C and 100 °C
∆R₂₅/R₂₅ Remarks
(typical)
MIL-STD-202, Test temperature: 150 °C
method 108 Duration: 1000 h
Unpowered
JESD22,
Lower test temperature: 40 °C
method JA-104 Upper test temperature: 150 °C
Number of cycles: 1000
Transfer time: < 10 s
Dwell time: 15 min
Air  Air
MIL-STD-202, Test temperature: 85 °C
method 103 Rel. humidity of air: 85%
Duration: 1000 h
MIL-STD-202,
method 108
Test voltage: V_NTC = 0.3 V DC
Test temperature: 150 °C
P_max = 0.35 mW
Duration: 1000 h
MIL-STD-883E, Visual inspection
method 2009
JESD22,
Measured with calibers
method JB-100
< 5%¹⁾
< 5%²⁾
< 5%²⁾
< 5%²⁾
MIL-STD-202,
method 215
MIL-STD-202,
method 213
MIL-STD-202,
method 204
Not applicable for SMD thermistors
(component has no marking, color
coding or coating)
Peak value: 1500 g
Half sine
Condition F
Acceleration: 5 g
Sweep time: 20 min
Frequency range: 10 ... 2000 Hz
3 × 12 cycles
< 5%¹⁾
< 5%¹⁾
Within the
specified
values
1) Except B57332V5103+360 ∆R25/R25 (typical) < 1%
2) Except B57332V5103+360 ∆R25/R25 (typical) < 3%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 23