PMK130 Datasheet, PDF (1/10 Pages) Astrodyne Corporation – 130W Open Frame and U-Channel Power Supplies with PFC

130W Open Frame and U-Channel Power Supplies with PFC
PMK130 series
3” x 5” x 1.4”
130 Watts Output Power
Single Output
Universal 90-264VAC Input
5VDC to 48VDC Outputs
4242VDC Input to Output Isolation
Active Power Factor Correction
Model Number
Output V
Output I max.
Ripple & Noise Efficiency(min/nom) Capacitive Load
SINGLE OUTPUT
PMK130S-5 (U)(-A)
PMK130S-12 (U)(-A)
PMK130S-15 (U)(-A)
PMK130S-24 (U)(-A)
PMK130S-28 (U)(-A)
PMK130S-36 (U)(-A)
PMK130S-48 (U)(-A)
5 VDC
12 VDC
15 VDC
24 VDC
28 VDC
36 VDC
48 VDC
22 Amps
10.8 Amps
8.7 Amps
5.4 Amps
4.6 Amps
3.6 Amps
2.7 Amps
100mV pk-pk
120mV pk-pk
120mV pk-pk
120mV pk-pk
120mV pk-pk
120mV pk-pk
120mV pk-pk
75% / 80%
80% / 82%
80% / 85%
82% / 85%
82% / 85%
82% / 85%
82% / 85%
10,000uF
26,800uF
22,000uF
28,000uF
16,800uF
1,950uF
7,800uF
Note:
1. The PMK130 Series is offered in an optional U-Channel Chassis as well as with optional 3.96mm pitch 5 and 10 Pin Input and Output connectors
(open frame construction and screw terminals are standard respectively). Simply add a “U” at the end of the Model Number to recieve the U-Channel
configuration or a “-A” to receive the pins, or both if both are desired. For example: The Model Number “PMK130S-5U-A” represents a single output
5VDC U-Channel supply with 3.96 pitched pins (5 Input; 10 Output) . See the Mechanical Dimensions on pages 3 through 8 in this specification
2. All “U” options are not covered by UL Certification unless provided with more than 10 CFM forced air cooling applied 6-10cm above T1.
3. Derating curves acceptable up tp 40°C for UL certified products
All specifications are typical at nominal input, full load, and 25°C unless other-
wise noted
* These are stress ratings. Exposure of the devices to any of these conditions
may adversely affect long term reliability. Proper operation under conditions
other than the standard operating conditions is neither warranteed nor implied.
WWW.ASTRODYNETDI.COM
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458