BCS5030G1 Datasheet, PDF (1/5 Pages) TDK Electronics – Visible Radiant Optical Sensor

Visible Radiant Optical Sensor /Data Sheet
BCS2015G1
BCS2015G1 is the photodiode which uses an amorphous silicone
semiconductor on the glass substrate. 　It is the most suitable for
Brightness Adjustment, Control of the Lighting systems. BCS2015G1 is
for surface mounthing.
Features
• Highly receptive to visible light but not receptive to infrared light (close
to Human eye visibility).
• Accurate illumination measurement can be taken without the use of an
infrared filter.
( Phototransistors and photodiodes that use crystal- silicon
semiconductors typically require this filtering.)
• Surface mounting can be used in lead- free reflow soldering.
• Lead- free, Cadmium-free
Shapes and dimension
Glass Substrate
BCS2015G1
Photo acceptance area
0.6 (1.25)
Dimensions in [mm]
Tolerance:±0.2mm
( ) : Typical value
Application
• Brightness control for LCD, EL and CRT
• Brightness control for Keypads (e. g. Mobile Phones)
• Positioning scanline for Rear Projecton TV
• Exposure adjust for Compact Camera
• Sub exposure adjust for Digital Camera
0.6 0.5 0.6
t=0.6 typ.
(0.7max.)
2
- Electrode
(
+ Electrode
)
Marker of polarity
Marker of polarity
Electrical Characterisic
Item
Output current
Output current
Dark current
100Lux*1
100Lux*1
VR=0.05V
Absolute Maximum Ratings
Item
Reverse biass voltage: VR
Non-reverse biass current
Temperature= 25deg.C
Value
Units
Min.
Typ. Max.
VR=0V (Short Circuit Current) μA
0.07
0.10 0.13
VR=5V
μA
0.08
0.12 0.16
pA
---
---
10
*Initial value
Temperature= 25deg.C
Value
Units
V
10
mA
2
Optical Characteristic
Spectral sensivty area
Peak of sensivity
Item
Units
nm
nm
Temperature= 25deg.C
Value
350 to 750
580±20
Others
Item
Operating temperature
Keep and transfer temperature
Dimensions
Weight
Units
deg. C
deg. C
mm
g
Value
-20 to 85
-40 to 85
2.0×1.5×0.6t
0.004
*1 White Fluor Light (color temperature=4200K)
51101
*All specifications are subject to change without notice.