TCS3200 Datasheet, PDF (3/14 Pages) TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS – COLOR LIGHT-TO-FREQUENCY CONVERTER

TCS3200, TCS3210
PROGRAMMABLE
COLOR LIGHT-TO-FREQUENCY CONVERTER
TAOS099A − AUGUST 2011
Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted)^†
Supply voltage, V_DD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 V
Input voltage range, all inputs, V_I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to V_DD + 0.3 V
Operating free-air temperature range, T_A (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 85°C
Storage temperature range (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 85°C
Solder conditions in accordance with JEDEC J−STD−020A, maximum temperature (see Note 3) . . . 260°C
† _{Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and}
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values are with respect to GND.
2. Long-term storage or operation above 70°C could cause package yellowing that will lower the sensitivity to wavelengths < 500nm.
3. The device may be hand soldered provided that heat is applied only to the solder pad and no contact is made between the tip of
the solder iron and the device lead. The maximum time heat should be applied to the device is 5 seconds.
Recommended Operating Conditions
Supply voltage, V_DD
High-level input voltage, V_IH
Low-level input voltage, V_IL
Operating free-air temperature range, T_A
V_DD = 2.7 V to 5.5 V
V_DD = 2.7 V to 5.5 V
MIN NOM MAX UNIT
2.7
5 5.5 V
2
V_DD
V
0
0.8 V
−40
70 °C
Electrical Characteristics at T_A = 25°C, V_DD = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
V_OH
High-level output voltage
V_OL
Low-level output voltage
I_IH
High-level input current
I_IL
Low-level input current
I_DD
Supply current
I_OH = − 2 mA
4
I_OL = 2 mA
Power-on mode
Power-down mode
S0 = H, S1 = H
500
Full-scale frequency (See Note 4)
S0 = H, S1 = L
100
S0 = L, S1 = H
10
Temperature coefficient of responsivity
λ ≤ 700 nm, −25°C ≤ T_A ≤ 70°C
k_SVS Supply voltage sensitivity
V_DD = 5 V ±10%
NOTE 4: Full-scale frequency is the maximum operating frequency of the device without saturation.
TYP
4.5
0.25
1.4
600
120
12
± 200
±0.5
MAX UNIT
V
0.40 V
5 μA
5 μA
2 mA
0.1 μA
kHz
kHz
kHz
ppm/°C
%/ V
The LUMENOLOGY r Company
r
r
www.taosinc.com
Copyright E 2011, TAOS Inc.
3