English
Language : 

SN74LVC3G07-Q1 Datasheet, PDF (2/9 Pages) Texas Instruments – TRIPLE BUFFER/DRIVER WITH OPEN-DRAIN OUTPUTS
◁
SN74LVC3G07-Q1
SCES616B – OCTOBER 2004 – REVISED APRIL 2008.................................................................................................................................................... www.ti.com
LOGIC DIAGRAM (POSITIVE LOGIC)
1A 1
7 1Y
2A 3
5 2Y
3A 6
2 3Y
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
VCC Supply voltage range
VI
Input voltage range
VO
Voltage range applied to any output in the high-impedance or power-off state(2)
VO
Voltage range applied to any output in the high or low state(2)(3)
IIK
Input clamp current
VI < 0
IOK Output clamp current
VO < 0
IO
Continuous output current
Continuous current through VCC or GND
θJA
Package thermal impedance(4)
Tstg Storage temperature range
MIN MAX UNIT
–0.5 6.5 V
–0.5 6.5 V
–0.5 6.5 V
–0.5 6.5 V
–50 mA
–50 mA
±50 mA
±100 mA
227 °C/W
–65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The value of VCC is provided in the recommended operating conditions table.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
2
Submit Documentation Feedback
Copyright © 2004–2008, Texas Instruments Incorporated
Product Folder Link(s): SN74LVC3G07-Q1
 ▷