OPA2333AIDGKR Datasheet, PDF (2/28 Pages) Texas Instruments – 1.8V, microPOWER CMOS OPERATIONAL AMPLIFIERS Zero-Drift Series

OPA333
OPA2333
SBOS351C – MARCH 2006 – REVISED MAY 2007
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be
more susceptible to damage because very small parametric changes could cause the device not to meet its published
specifications.
ORDERING INFORMATION⁽¹⁾
PRODUCT
OPA333
OPA2333
PACKAGE-LEAD
SOT23-5
SC70-5
SO-8
SO-8
DFN-8
MSOP-8
PACKAGE DESIGNATOR
DBV
DCK
D
D
DRB
DGK
PACKAGE MARKING
OAXQ
BQY
O333A
O2333A
BQZ
OBAQ
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Supply Voltage
Signal Input Terminals, Voltage⁽²⁾
Signal Input Terminals, Voltage⁽²⁾
Output Short-Circuit⁽³⁾
Operating Temperature
Storage Temperature
Junction Temperature
ESD Ratings:
Human Body Model (HBM)
Charged Device Model (CDM)
Machine Model (MM)
OPA333, OPA2333
+7
–0.3 to (V+) + 0.3
±10
Continuous
–40 to +150
–65 to +150
+150
4000
1000
400
UNIT
V
V
mA
°C
°C
°C
V
V
V
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not supported.
(2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.3V beyond the supply rails should
be current limited to 10mA or less.
(3) Short-circuit to ground, one amplifier per package.
2
Submit Documentation Feedback