FXP522A07A001 Datasheet, PDF (3/14 Pages) Taoglas antenna solutions – Venti Wifi MiMo 2.4/5.8GHz Flexible Embedded Antenna

be assured you are meeting regulatory requirements for that module.
For example, a module manufacturer may state that the antenna must have less than 2dBi peak
gain, but you don’t need to select an embedded antenna that has a peak gain of less than 2dBi
in free-space. This will give you a less optimized solution. It is better to go for a slightly higher
free-space peak gain of 3dBi or more if available. Once that antenna gets integrated into your
device, performance will degrade below this 2dBi peak gain due to the effects of GND plane,
surrounding components, and device housing. If you want to be absolutely sure, contact Taoglas
and we will test. Choosing a Taoglas antenna with a higher peak gain than what is specified by
the module manufacturer and enlisting our help will ensure you are getting the best
performance possible without exceeding the peak gain limits.
Customized cable lengths and connector versions can be supplied Contact a Taoglas regional
support center for support.
2. Specification
Frequency (MHz)
Peak Gain (dBi)
Average Gain (dBi)
ELECTRICAL
Port 1
2400-2500
5150-5850
3.78
4.63
-1.71
-1.72
2400-2500
3.15
-1.61
Port 2
5150-5850
4.61
-1.73
Efficiency (%)
Impedance
Polarization
Radiation Pattern
Input Power
67.51
67.80
68.65
50Ω
Linear
Omni-directional
2W Max.
67.70
Dimensions
Antenna Body Material
Cable
Cable Length
Connector
Weight
MECHANICAL
80mm X 20mm X 0.1mm
Polymer
2 x Black 1.13mm Coaxial Cable
100mm
2 x IPEX MHFI (u.fl)
6g
SPE-14-8-112/C/WY
Page 3 of 14