FXP522A07A001 Datasheet, PDF (2/14 Pages) Taoglas antenna solutions – Venti Wifi MiMo 2.4/5.8GHz Flexible Embedded Antenna

1. Overview
The FXP.522 Venti antenna is a 2* MIMO, flexible embedded monopole type antenna designed to
be used inside high speed devices on modern WiFi networks.
Applications
- High speed HD video streaming
- High capacity mass transit communication networks
Omni-directional, the antenna has excellent efficiency and isolation performance for dual-band
WiFi applications. It has over 60% efficiency in the 2.4GHz bands, and over 50% in the 5GHz
bands. With a thickness of only 0.15mm, the FXP.522 is an ideal solution for maintaining high
performance while fitting into narrow spaces such as plastic enclosures for routers, gateways,
set-top boxes and other WiFi applications. the FXP.522 was specifically tuned on ABS plastic,
ensuring reliable performance on PC and ABS housings.
The antenna has been designed on a flexible polymer with a rectangular form-factor and cable
connection for an easy installation. The antenna comes with double-sided 3M tape for easy "peel
and stick" mounting. The antenna cables feature IPEX MHF(u.fl) connectors for easy installation.
In order to comply with some module FCC requirements, peak gain can be reduced by using
longer cable lengths or when tested in actual device environment.
Many module manufacturers specify peak gain limits for any antennas that are to be connected
to that module. Those peak gain limits are based on free-space conditions. In practice, the peak
gain of an antenna tested in free-space can degrade by at least 1 or 2dBi when put inside a
device. So ideally you should go for a slightly higher peak gain antenna than mentioned on the
module specification to compensate for this effect, giving you better performance.
Upon testing of any of our antennas with your device and a selection of appropriate layout,
integration technique, or cable, Taoglas can make sure any of our antennas’ peak gain will be
below the peak gain limits. Taoglas can then issue a specification and/or report for the selected
antenna in your device that will clearly show it complying with the peak gain limits, so you can
SPE-14-8-112/C/WY
Page 2 of 14