CM04RC01T Datasheet, PDF (8/10 Pages) Taiyo Yuden (U.S.A.), Inc – COMMON MODE CHOKE COILS (FOR DC AND SIGNAL LINES) SMD TYPE

RELIABILITY DATAɹ
3/4
Specifled Value
Item
Surface Mount Surface Mount High CommonMode
CommonMode
High current
current inductors
Choke Coils
Choke Coils
inductors 08 Type
04/05/06 Type
CM04RC
BU05MC
19.Resisitance to soldering No abnormality
heat
Refer to individual specification.
Balun Transformers
BU05MC
Test Method and Remarks
SMD inductor (Reflow soldering)
Traenmgpee_ɹrature _{150V180C 180Cmin 200Cmin Peak temperature 230Cmax}
Duraɹtion 110sec max 40sec max 30sec max
5
20.Thermal shock
Inductance changeDWithinDM10L
Refer to individual specification.
RecoveryDAt least 2 hrs of recovery under the standard
condition after the rmoval from test chamber,
followed by the measurement within 24 hrs.
Commom mode choke coilD
ᶃ Reflow soldering
PreheatingD100 to 150C 1 to 2min.
PeakD230 to 240C Within 5sec.
More than 200C Within 40 sec.
Number of reflowDWithin 2 times.
ᶄ Manual soldering
Solder temperatureD350M5C
DurationD3M1sec.
RecoveryD1 to 2 hrs of recovery under the standard
condition after the test.
SMD inductor
Accoding to JIS C0025
SMD inductorf08 typeg
Conditions of 1 cycle
Step
1
2
3
4
TemperaturefCg
K25^JK03
Room temperature
J85^JK20
Room temperature
Durationfming
30M3
Within 3
30M3
Within 3
SMD inductorf04, 05, 06 typeg
Conditions of 1 cycle
Step
1
2
3
4
TemperaturefCg
K25^JK03
Room temperature
J105^JK20
Room temperature
Durationfming
30M3
Within 3
30M3
Within 3
Number of cycyleD10 cycles
RecoveryDAt least 2 hrs of recovry under the standard
condition after the removal from test chamber,
followed by the measurement within 24 hrs.
Commom mode choke coilD
Accoding to JIS C0025
Conditions of 1 cycle
TemperaturefCg
CM04RCYBU05MC
Durationfming
1
K25M3C
30M3
2
Room temperature
3
3
85M2C
30M3
4
Room temperature
3
Number of cycyleD10 cycles
RecoveryD1V2 hrs of recovery under the standard condi-
tion after removal from test chamber.
395