GMK316F106ZL-T Datasheet, PDF (21/28 Pages) Taiyo Yuden (U.S.A.), Inc – Please read this notice before using the TAIYO YUDEN products

13. Resistance to Soldering
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±2.5% or ±0.25pF, whichever is larger.
: Initial value
: Initial value
（between terminals） : No abnormality
: No abnormality
: Within ±2.5%
: Initial value
: Initial value
（between terminals） : No abnormality
High Permittivity （Class2） Note 1
Appearance
: No abnormality
Capacitance change : Within ±7.5%（BJ, B7, C6, C7, LD(※)）
Within ±20%（F）
Dissipation factor
: Initial value
Insulation resistance : Initial value
Withstanding voltage （between terminals）: No abnormality
Note: ※LD Low distortion high value multilayer ceramic capacitor
Test
Methods and
Remarks
Preconditioning
Preheating
Solder temp.
Duration
Recovery
Preconditioning
Preheating
Solder temp.
Duration
Recovery
Class 1
042, 063 Type
105 Type
None
150℃, 1 to 2 min.
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
270±5℃
3±0.5 sec.
6 to 24 hrs （Standard condition） Note 5
042、063 Type
150℃, 1 to 2 min.
Class 2
105, 107, 212 Type
316, 325 Type
Thermal treatment （at 150℃ for 1 hr） Note 2
80 to 100℃, 2 to 5 min.
80 to 100℃, 5 to 10 min.
150 to 200℃, 2 to 5 min.
150 to 200℃, 5 to 10 min.
270±5℃
3±0.5 sec.
24±2 hrs （Standard condition） Note 5
14. Temperature Cycle (Thermal Shock）
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±2.5% or ±0.25pF, whichever is larger.
: Initial value
: Initial value
（between terminals） : No abnormality
: No abnormality
: Within ±0.25pF
: Initial value
: Initial value
（between terminals） : No abnormality
High Permittivity （Class2） Note 1
Appearance
: No abnormality
Capacitance change : Within ±7.5% （BJ, B7, C6, C7, LD(※)）
Within ±20% （F）
Dissipation factor
: Initial value
Insulation resistance : Initial value
Withstanding voltage （between terminals） : No abnormality
Note: ※LD Low distortion high value multilayer ceramic capacitor
Preconditioning
Class 1
None
Class 2
Thermal treatment （at 150℃ for 1 hr）
Note 2
Test
Methods and
Remarks
1 cycle
Step
Temperature（℃）
1
Minimum operating temperature
2
Normal temperature
3
Maximum operating temperature
4
Normal temperature
Time（min.）
30±3
2 to 3
30±3
2 to 3
Number of cycles
Recovery
5 times
6 to 24 hrs （Standard condition） Note 5
24±2 hrs （Standard condition） Note 5
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E02R01