PQ60050HGA30 Datasheet, PDF (7/14 Pages) SynQor Worldwide Headquarters – 30 Amp, No Heatsink, Isolated DC/DC Converter

Performance Curves
Half
Brick
48Vin 5.0Vout 30A
Figure 15
10 µH
source
impedance
Figure 14
Figure 16
i_S
V_SOURCE
i_C
47 µF,
<1Ω ESR
electrolytic
capacitor
DC/DC
Converter
V_OUT
1 µF 15 µF,
ceramic _{450mΩ ESR}
capacitor _tantalum
capacitor
Figure 13: Test set-up diagram showing measurement points for Input
Terminal Ripple Current (Figure 14), Input Reflected Ripple Current
(Figure 15) and Output Voltage Ripple (Figure 16).
Figure 14: Input
rent and nominal
TineprmutinvaolltRagipepwleitChu1r0r_µenHt,siocu, _{ractefuimllpreadteadncoeuatpnudt}
cur-
47µF
electrolytic capacitor (100 mA/div). (See Figure 13)
Figure 15: Input reflected ripple current, is, through a 10 µH source
inductor at nominal input voltage and rated load current (5 mA/div).
(See Figure 13)
Figure 16: Output voltage ripple at nominal input voltage and rated
load current (20 mV/div). Load capacitance: 1µF ceramic capacitor
and 15µF tantalum capacitor. Bandwidth: 20 MHz. (See Figure 13)
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
0
36 V
48 V
75 V
4
8
12 16 20 24 28 32 36 40
Load Current (A)
Figure 17: Output voltage vs. load current showing typical current limit
curves and converter shutdown points.
Product # PQ60050HGA30
Phone [phone]
Figure 18: Load current (20A/div) as a function of time when the con-
verter attempts to turn on into a 1 mΩshort circuit. Top trace (2ms/div)
is an expansion of the on-time portion of the bottom trace.
Doc.# 005-2HG650C Rev. E
9/30/08
Page 7