PQ60033EKX15 Datasheet, PDF (6/15 Pages) SynQor Worldwide Headquarters – Eighth-brick DC-DC Converter

Technical Specification
Input: 35-75V
Output: 3.3V
Current: 15A
Part No.: PQ60033EKx15
PQ60033EKx15 Standards & Qualification Testing
Pending
Parameter
Notes & Conditions
STANDARDS COMPLIANCE
UL/cUL 60950-1
File # E194341, Basic insulation
EN60950-1
Certified by TUV
Needle Flame Test (IEC 695-2-2)
Test on entire assembly; board & plastic components UL94V-0 compliant
IEC 61000-4-2
ESD test, 8 kV - NP, 15 kV air - NP (Normal Performance)
Note: An external input fuse must always be used to meet these safety requirements. Contact SynQor for official safety certificates on new
releases or download from the SynQor website.
Parameter
QUALIFICATION TESTING
Life Test
Vibration
Mechanical Shock
Temperature Cycling
Power/Thermal Cycling
Design Marginality
Humidity
# Units Test Conditions
32
95% rated Vin and load, units at derating point, 1000 hours
5
10-55 Hz sweep, 0.060" total excursion, 1 min./sweep, 120 sweeps for 3 axis
5
100g minimum, 2 drops in x and y axis, 1 drop in z axis
10
-40 °C to 100 °C, unit temp. ramp 15 °C/min., 500 cycles
5
Toperating = min to max, Vin = min to max, full load, 100 cycles
5
Tmin-10 °C to Tmax+10 °C, 5 °C steps, Vin = min to max, 0-105% load
5
85 °C, 85% RH, 1000 hours, continuous Vin applied except 5 min/day
Product # PQ60033EKx15
Phone [phone]
www.synqor.com
Doc.# 005-0005111 Rev. B
06/17/09
Page 6