NQ04T33VKA10 Datasheet, PDF (4/18 Pages) SynQor Worldwide Headquarters – SIP Single In-Line Package

Technical Specification
Input: 3.0 - 5.5V
Outputs: 0.9 - 3.3V
Current: 10A
Package: SIP
ELECTRICAL CHARACTERISTICS - NQ04T33VKA10 Series
V_in=3.3Vdc and 5.0Vdc except 3.3V_out units where V_in=5.0V; T_A=25°C, airflow rate=300 LFM unless otherwise noted; full operating tem-
perature range is -40°C to +105°C ambient temp with appropriate power derating. Specifications subject to change without notice.
Parameter
ABSOLUTE MAXIMUM RATINGS
Input Voltage
Non-Operating
Operating
Operating Transient Protection
Operating Temperature
Storage Temperature
Voltage at ON/OFF input pin (N, O options)
Voltage at ON/OFF input pin (P option)
INPUT CHARACTERISTICS
Operating Input Voltage Range¹
“
Input Under-Voltage Lockout¹
Turn-On Voltage Threshold
Turn-On Voltage Threshold
Turn-Off Voltage Threshold
Turn-Off Voltage Threshold
Maximum Input Current (3.0Vin\4.5Vin)
“
“
“
“
“
“
No-Load Input Current (3.3Vin)
No-Load Input Current (5.0Vin)
“
Disabled Input Current
“
Inrush Current Transient Rating
Response to Input Transient (3.3Vin)
“
Response to Input Transient (5.0 Vin)
“
Input Reflected-Ripple Current (3.3Vin)
“
Input Reflected-Ripple Current (5.0Vin)
“
“
Input Terminal Ripple Current (3.3Vin)
“
Input Terminal Ripple Current (5.0Vin)
“
“
“
Recommended Input Fuse
Input Filter Capacitor Value
Input Ripple Voltage (3.3Vin)
“
Input Ripple Voltage (5.0Vin)
“
“
Recommended External Input Capacitance²
Setpoint
All
All
All
All
All
All
All
0.9-2.5V
3.3V
0.9-2.5V
3.3V
0.9-2.5V
3.3V
0.9V
1.0V
1.2V
1.5V
1.8V
2.5V
3.3V
0.9-2.5V
0.9-2.5V
3.3V
0.9-2.5V
3.3V
All
0.9V
2.5V
0.9V
3.3V
0.9-1.8V
2.5V
0.9,1.0V
1.2,3.3V
1.5-2.5V
0.9-1.8V
2.5V
0.9,1.0V
1.2,1.5V
1.8,2.5V
3.3V
All
All
0.9,2.5V
1.0-1.8V
0.9-1.2V
1.5,1.8V
2.5,3.3V
All
Min.
3.0
-40
-55
-3
-0.5
3.0
4.5
1.9
4.1
1.9
3.5
Typ. Max. Units Notes & Conditions
6.0
5.5
7.0
105
125
6.5
Vin + 0.3
V Continuous
V Continuous
V 100ms transient
°C
°C
V Negative/Open logic
V Positive/Open logic
3.3-5.0
5.5
5.0
5.5
V See notes on Page 6
V
“
2.4
2.85
V
4.3
4.5
V
2.3
2.85
V
3.7
4.0
V
3.9\2.6
A 100% Load, full temp range, for all voltages
4.3\2.9
A
“
5.0\3.4
A
“
5.9\4.0
A
“
7.0\4.7
A
“
9.3\6.3
A
“
8.1
A 3.3Vout at 4.5Vin only
80
105
mA
100
130
mA
80
105
mA
15
25
mA
10
20
mA
0.1
A²s
130
mV/V 50mV/µs input transient (all)
250
mV/V
“
75
mV/V
200
mV/V
134
mA Peak to peak through 1µH inductor
84
mA
“
109
mA Peak to peak through 1µH inductor
125
mA
“
147
mA
“
2.0
A RMS; 200µF/50mΩ input cap.
1.4
A
“
1.7
A RMS 200µF/50mΩ input cap.
2.0
A
“
2.3
A
“
2.0
A
“
20
A Fast blow external fuse recommended
40
µF Internal ceramic
84
mV RMS, full load, 200µF/50mΩ input cap.
94
mV
“
75
mV RMS, full load, 200µF/50mΩ input cap.
88
mV
“
94
mV
“
200
µF Net 50mΩ ESR
Product # NQ04T33VKA10
Phone [phone]
www.synqor.com
Doc.# 005-2NV4T3F Rev. A
09/06/05
Page 4