PQ60150SMX03 Datasheet, PDF (3/15 Pages) SynQor Worldwide Headquarters – Output current limit and short circuit protection

PQ60-SMC Mechanical Drawing
.600 (15.24)
.450 (11.43)
.300 (7.62)
.150 (3.81)
1.036±.020 (26.31±0.5)
Technical
Specification
PQ60150SMx03
0.500±.025
(12.7±0.63)
Overall height
1.436±.020
(36.47±0.5)
1.10
(27.9)
87 6 5 4
Top View
0.18
(4.6)
Side View
.143±.020
(3.63±0.5)
12 3
.218±.020
(5.54±0.5)
.300 (7.62)
.600 (15.24)
NOTES
1) Pins 1-3, 5-7 are 0.040” (1.02mm) diameter, with 0.080” (2.03mm)
diameter standoff shoulders.
2) Pins 4 and 8 are 0.062” (1.57 mm) diameter with 0.100" (2.54 mm)
diameter standoff shoulders.
3) Other pin extension lengths available. Recommended pin length is
0.03” (0.76mm) greater than the PCB thickness.
4) All Pins: Material - Copper Alloy- Finish (RoHS 6/6) - Matte Tin over
Nickel plate
5) Undimensioned components are shown for visual reference only.
6) All dimensions in inches (mm) Tolerances: x.xx +/-0.02 in. (x.x
+/-0.5mm) x.xxx +/-0.010 in. (x.xx +/-0.25mm)
7) Weight: 1.14oz (32.3g)
8) Workmanship: Meets or exceeds IPC-A-610C Class II
PIN DESIGNATIONS
Pin Name Function
1 Vin(+) Positive input voltage
2
ON/OFF
TTL input to turn converter on and off, referenced to
Vin(–), with internal pull up.
3 Vin(–) Negative input voltage
4 Vout(–) Negative output voltage
5 SENSE(–) Negative remote sense(see note 1)
6 TRIM Output voltage trim (see note 2)
7 SENSE(+) Positive remote sense (see note 3)
8 Vout(+) Positive output voltage
Notes:
1)
SENSE(–) should be connected to Vout(–) either remotely or at
the converter.
2) Leave TRIM pin open for nominal output voltage.
3)
SENSE(+) should be connected to Vout(+) either remotely or at
the converter.
Product # PQ60150SMx03
Phone [phone]
www.synqor.com
Doc.# 005-0005168 Rev. C
06/28/11
Page 3