MCOTS-F-28-T-HT Datasheet, PDF (1/14 Pages) SynQor Worldwide Headquarters – Standby circuitry to minimize quiescent power draw

MCOTS-F-28-T-HT
Transient Filter
Half Brick
-40V to +40V
Continuous Input
MILITARY COTS EMI FILTER
30A
40mΩ @ 100°C
Output Current
Max. DC Resistance
FULL POWER OPERATION: -55ºC to +100ºC
>80dB @ 250kHz
Differential Attenuation
The Mil-COTS series of EMI filters brings SynQor’s field proven
technology and manufacturing expertise to the military and
aerospace industry. SynQor’s innovative packaging approach
ensures survivability in the most hostile environments.
Compatible with the industry standard format, these filters
have high differential-mode and common-mode attenuation,
low DC resistance, and a stabilizing bulk capacitor resistor.
They follow conservative component derating guidelines and
they are designed and manufactured to comply with a wide
range of military standards. This filter, when combined with
Mil-COTS DC-DC converters, is designed to comply with MIL-
STD-704, MIL-STD-1275, RTCA/DO-160, DEF-STAN 61-5
and MIL-STD-461 for a 28Vin system.
M_E-^C_4M0^O_VI^T_t^S_Fo^-_I+^F_L4^-_T²_0EV⁸_IR^-_N ^T₃^-₀^H_AO^T_U^-_T ^N-S
Operational Features
• Transient suppression circuitry to block voltage surges
and spikes
• _{Soft-Start circuitry to limit in-rush charging currents}
• Reverse polarity protection with a low-loss
synchronous rectifier
• _{Output power limit for short-circuit protection}
• _{ON/OFF pass-through circuitry}
• _{Standby circuitry to minimize quiescent power draw}
• _{30 amps output current}
• _{Very low DC resistance}
• _{> 80 dB differential-mode attenuation at 250kHz}
• _{> 36 dB common-mode attenuation at 250kHz}
• Stabilizing bulk capacitor and damping resistor
included
• _{All capacitors are X7R multi-layer ceramic}
• _{Designed to meet most MIL-STD 461 EMI}
requirements
Designed and Manufactured in the USA
Safety Features
• 2250V input/output to common mode isolation
• Certified 60950-1, 2nd Edition
Specification Compliance
MCOTS filters (with MCOTS converters) are designed to meet:
• MIL-HDBK-704-8 (A through F)
• RTCA/DO-160 Section 16, 17, 18
• MIL-STD-1275 (B, D) (Full power operation down to 16VIN)
• DEF-STAN 61-5 (part 6)/(5, 6)
• MIL-STD-461 (C, D, E, F)
In-Line Manufacturing Process
Screening/Qualification
• AS9100 and ISO 9001 Certified Facility
• Full component traceability
Mechanical Features
• Size: 2.49” x 2.39” x 0.51”(63.1 x 60.6 x 13.0 mm)
• Total weight: 4.6 oz. (130 g)
• Flanged baseplate version available
• Qualified to MIL-STD-810
• Available with S-Grade or M-Grade screening
• Pre-cap inspection per IPC-A-610, Class III
• Temperature cycling per MIL-STD-883, Method 1010,
Condition B, 10 cycles
• Burn-In at 100 °C baseplate temperature
• Final visual inspection per MIL-STD-883, Method 2009
Product # MCOTS-F-28-T-HT
Phone [phone]
www.synqor.com
Doc.# 005-IH01196 Rev. I
10/21/16
Page 1