LP1030D Datasheet, PDF (3/3 Pages) Supertex, Inc – 300V, Dual P-Channel Enhancement-Mode Lateral MOSFET

5-Lead SOT-23 Package Outline (K1)
2.90x1.60mm body, 1.45mm height (max), 0.95mm pitch
θ1
D
e1
5
Note 1
(Index Area
D/2 x E/2)
E1 E
1
e
b
Top View
L
L1
View B
LP1030D
L2 ^Gauge
Plane
Seating
θ
Plane
View B
A ^A2
A1
Seating
Plane
Side View
View A - A
Note:
1. A Pin 1 identifier must be located in the index area indicated. The Pin 1 identifier can be: a molded mark/identifier; an embedded metal marker; or
a printed indicator.
Symbol
A A1 A2 b
D
E E1 e
e1
L L1 L2 θ θ1
MIN 0.90* 0.00 0.90 0.30 2.75* 2.60* 1.45*
0.30
0^O
5^O
Dimension
(mm)
NOM
-
-
1.15
-
2.90
2.80
1.60
0.95
BSC
1.90
BSC
0.45
0.60
REF
0.25
BSC
4^O
10^O
MAX 1.45 0.15 1.30 0.50 3.05* 3.00* 1.75*
0.60
8^O 15^O
JEDEC Registration MO-178, Variation AA, Issue C, Feb. 2000.
* This dimension is not specified in the JEDEC drawing.
Drawings not to scale.
Supertex Doc. #: DSPD-5SOT23K1, Version A041309.
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline
information go to http://www.supertex.com/packaging.html.)
Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives
an adequate “product liability indemnification insurance agreement.” Supertex inc. does not assume responsibility for use of devices described, and limits its liability
to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and
specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com)
©2014 Supertex inc. All rights reserved. Unauthorized use or reproduction is prohibited.
Doc.# DSFP-LP1030D
A031414
3
Supertex inc.
1235 Bordeaux Drive, Sunnyvale, CA 94089
Tel: [phone]
www.supertex.com