S9408S Datasheet, PDF (6/10 Pages) Summit Microelectronics, Inc. – Serial Input, Quad 8-Bit Nonvolatile DACPOT

S9408
ABSOLUTE MAXIMUM RATINGS
VDD to GND .................................................................... -0.5V to +7V
Digital Inputs to GND ............................................ -0.5V to VDD+0.5V
Analog Inputs to GND ........................................... -0.5V to VDD+0.5V
Digital Outputs to GND ......................................... -0.5V to VDD+0.5V
Analog Outputs to GND ........................................ -0.5V to VDD+0.5V
Temperature Under Bias ........................................... -55°C to +125°C
Storage Temperature ................................................ -65°C to +150°C
Lead Soldering (10 Sec Max) .................................................... 300°C
Stresses listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions outside those
listed in the operational sections of this specification is not implied.
Exposure to any absolute maximum rating for extended periods may
affect device performance and reliability.
RECOMMENDED OPERATING CONDITIONS
Condition
Temperature
VDD
Min
-40°C
+2.7V
Max
+85°C
+5.5V
2015 PGM T2 1.2
RELIABILITY CHARACTERISTICS (Over recommended operating conditions unless otherwise specified)
Symbol
V_ZAP
I_LTH
T_DR
N_END
Parameter
ESD Susceptibility
Latch-up
Data Retention
Endurance
Min
2000
100
100
1,000,000
Max
Unit
V
mA
Years
Storage Cycles
DC ELECTRICAL CHARACTERISTICS (Over recommended operating conditions unless otherwise specified)
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
I_DD
Supply current during store
(note 1)
CS = V_IL
1.8
23.50
mA
I_SB Standby supply current
I_IH
Input leakage current
I_IL
Input leakage current
V_IH High level input voltage
V_IL Low level input voltage
V
High level output voltage
OH
V_OL Low level output voltage
CS = V_IH
V_IN = V_DD
V_IN = 0V
260
500
µA
<1
10
µA
<1
–10
µA
2
V_DD
V
0
0.8
V
IOH = –400µA
IOL = 1mA, V_DD = 5V;
IOL = 0.4mA, V_DD = 2.7V
V – 0.3
DD
V
0.4
V
Note 1: IDD is the supply current drawn while the EEPROM is being updated.
2015 2.2 8/2/00
6
SUMMIT MICROELECTRONICS, Inc.