STM8S103F3U6TR Datasheet, PDF (93/117 Pages) STMicroelectronics – Access line, 16 MHz STM8S 8-bit MCU, up to 8 Kbytes Flash

STM8S103K3 STM8S103F3 STM8S103F2
Electrical characteristics
(1) _{Data based on characterization results, not tested in production}
10.3.11.6 Static latch-up
Two complementary static tests are required on 10 parts to assess the latch-up performance:
• ^{A supply overvoltage (applied to each power supply pin)}
• ^{A current injection (applied to each input, output and configurable I/O pin) are performed}
on each sample.
This test conforms to the EIA/JESD 78 IC latch-up standard. For more details, refer to the
application note AN1181.
Symbol Parameter
Table 51: Electrical sensitivities
Conditions
Class⁽¹⁾
T_A = 25 °C
A
LU
Static latch-up class
T_A = 85 °C
A
T_A = 125 °C
A
(1) _{Class description: A Class is an STMicroelectronics internal specification. All its limits}
are higher than the JEDEC specifications, that means when a device belongs to class A it
exceeds the JEDEC standard. B class strictly covers all the JEDEC criteria (international
standard).
DocID15441 Rev 9
93/117