UM0934 Datasheet, PDF (87/113 Pages) STMicroelectronics – ST7570 S-FSK power line networking System-on-Chip

UM0934
Management information base (MIB)
Table 138. MIB object 00A1h: Write error data format
Byte
Returned value
Error description
ERR_ILLEGAL_DATA_COMMAND Wrong number of data bytes or value out of available range
0
ERR_PARAM_VAL_OUTOFRANGE At least one configuration value is out of the related available range
6.5.31
00A4h (PRESLOT/ZC/TS/BIT and ZC_IN_D configuration)
This parameter configures the operating functions of PRESLOT/ZC/TS/BIT output and
ZC_IN_D pins.
The confirm message of a CMD_ReadDBRequest returns the current values without
changing them. The CMD_WriteDBRequest sets the corresponding operating functions and
the confirm message returns the corresponding value.
Table 139. MIB object 00A4h: Write request data format
Byte
Label
Description
Available range Factory default
b0..b2: PRESLOT/ZC/TS/BIT
• 0: PRESLOT
• 1: ZC
• 2: TS
• 3: BIT
• 4: TXP
0 PRESLOT/ZC/TS/BIT and ZC_IN_D _{• 5: RXP}
• 6: TXRXP
b3: ZC_IN_D
• 0: ZC_IN_D_OFF
• 1: ZC_IN_D_ON
0 .. 6
0 .. 1
PRESLOT
ZC_IN_D_OFF
b4..b7: reserved
0
0
Read/write confirm data format:
The same as request.
Table 140. MIB object 00A4h: Write error data format
Byte
Returned value
Error description
0
ERR_ILLEGAL_DATA_COMMAND
Wrong number of data bytes
Doc ID 17389 Rev 2
87/113