VB526SP-E Datasheet, PDF (7/19 Pages) STMicroelectronics – High voltage ignition coil driver power integrated circuit

VB526SP-E
2
Electrical specifications
Electrical specifications
2.1
Absolute maximum rating
Stressing the device above the ratings listed in the “Absolute maximum ratings” tables may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the Operating sections of
this specification is not implied. Exposure to the conditions in this section for extended
periods may affect device reliability. Refer also to the STMicroelectronics SURE Program
and other relevant quality documents.
Table 3. Absolute maximum ratings
Symbol
Parameter
HV_c
I_C
I_C(gnd)
V_CC
I_s
I_s(gnd)
V_IN
I_IN
f_IN
V_OUT(flag)
I_OUT(flag)
P_max
E_s/b
V_ESD
V_ESD
V_ESD
I_BD
V_BD
T_j
T_stg
V_E
I_E
Collector voltage (internally limited)
Collector current (internally limited)
DC current on emitter power
Driving stage supply voltage
Driving circuitry supply current
DC current on ground pin
Input voltage
Maximum input current
Logic input frequency in operative mode
Output voltage primary threshold current level
Flag output current
Power Dissipation (T_c = 25 °C)
Self clamped energy during output power clamping
(see Figure 5)
ESD voltage (HV_c pin)
ESD voltage (enable pin)
ESD voltage (other pins)
Input darlington base current
Input darlington base voltage
Operating junction temperature
Storage temperature range
Maximum enable voltage
Maximum enable current
Value
Unit
-0.3 to V_clamp
V
10
A
±10.5
A
-0.3 to 7
V
±200
mA
±1
A
-0.3 to V_CC + 0.3
V
100
mA
DC to 150
Hz
-0.3 to V_CC + 0.3
V
100
mA
125
W
275
mJ
±4
KV
+1.5; -2
KV
±2
KV
150
mA
Internally limited
V
-40 to 150
°C
-55 to 150
°C
-0.3 to 5.5
V
±150
µA
Doc ID 18029 Rev 1
7/19