VB526SP-E Datasheet, PDF (1/19 Pages) STMicroelectronics – High voltage ignition coil driver power integrated circuit

VB526SP-E
High voltage ignition coil driver power integrated circuit
Features
Type
VB526SP-E
V_cl
360 V
I_cl
10 A
I_CC
150 mA
■ ECOPACK^®: lead free and RoHS compliant
■ Primary coil voltage internally set
■ Coil current limit internally set
■ Logic level compatible input
■ Driving current quasi proportional to collector
current
■ Single flag on coil current
■ Low voltage clamp thermal shutdown
10
1
PowerSO-10
Description
The VB526SP-E is a high voltage power
integrated circuit made using the
STMicroelectronics™ VIPower™ M1-3
technology, with Darlington and logic level
compatible vertical current flow power driving
circuit.
The enable pin allows to externally block the
switch when the input is on. A built-in protection
circuit for coil current limiting and collector voltage
clamping allows the device to be used as a smart,
high voltage, high current interface in advanced
electronic ignition systems. If the input signal from
the microcontroller happens to remain high, the
device protects itself against overheating by
forcing collector current to smoothly decrease
(low voltage clamp feature) to avoid undesired
spark.
Table 1. Device summary
Package
PowerSO-10
September 2010
Tube
VB526SP-E
Order codes
Tape and real
VB526SPTR-E
Doc ID 18029 Rev 1
1/19
www.st.com
1