LPS331AP Datasheet, PDF (7/36 Pages) STMicroelectronics – MEMS pressure sensor: 260-1260 mbar absolute digital output barometer

LPS331AP
Mechanical and electrical specifications
2.3
Absolute maximum ratings
Stress above those listed as “Absolute maximum ratings” may cause permanent damage to
the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 6. Absolute maximum ratings
Symbol
Ratings
Vdd Supply voltage
Vdd_IO I/O pins supply voltage
Vin Input voltage on any control pin
P Overpressure
T_STG Storage temperature range
ESD Electrostatic discharge protection
Maximum value Unit
-0.3 to 4.8
V
-0.3 to 4.8
V
-0.3 to Vdd_IO +0.3 V
20
bar
-40 to +125
°C
2 (HBM)
kV
Note:
Supply voltage on any pin should never exceed 4.8 V.
This is a mechanical shock sensitive device, improper handling can cause permanent
damage to the part.
This is an ESD sensitive device, improper handling can cause permanent damage to
the part.
Doc ID 022112 Rev 7
7/36