TDA7360 Datasheet, PDF (6/22 Pages) STMicroelectronics – 22W BRIDGE / STEREO AUDIO AMPLIFIER WITH CLIPPING DETECTOR

TDA7360
RECOMMENDED VALUES OF THE EXTERNAL COMPONENTS (ref to the Stereo Test and Applica-
tion Circuit)
Component
C1
C2
C3
C4
C5
C6
C7
Recommended
Value
0.22µF
0.22µF
100µF
22µF
220µF (min)
100nF (min)
2200µF
Purpose
Input
Decoupling
(CH1)
Input
Decoupling
(CH2)
Supply Voltage
Rejection
Filtering
Capacitor
Stand-By
ON/OFF
Delay
Supply By-Pass
Supply By-Pass
Output
Decoupling
CH2
Larger than the Recomm.
Value
—
Smaller than the Recomm.
Value
—
—
—
Longer Turn-On Delay Time
- Worse Supply Voltage Rejection.
- Shorter Turn-On Delay Time
- Danger of Noise (POP)
Delayed Turn-Off by Stand-By
Switch
Danger of Noise (POP)
Danger of Oscillations
Danger of Oscillations
-Decrease ofLow Frequency CutOff - Increase of Low Frequency Cut Off
- Longer Turn On Delay
- Shorter Turn On Delay
Figure 5: Output Power vs. Supply Voltage
(Stereo)
Figure 6: Output Power vs. Supply Voltage
(Stereo)
Figure 7: Output Power vs. Supply Voltage
(Stereo)
Figure 8: Output Power vs. Supply Voltage
(Bridge)
6/22