TDA7360 Datasheet, PDF (10/22 Pages) STMicroelectronics – 22W BRIDGE / STEREO AUDIO AMPLIFIER WITH CLIPPING DETECTOR

TDA7360
Stereo/Bridge Switching
There is also no need for external components for
changing from stereo to bridge configuration (figg.
23-26). A simple short circuit between two pins al-
lows phase reversal at one output, yet maintain-
ing the quiescent output voltage.
Stand-by
The device is also equipped with a stand-by func-
Figure 23: Block Diagram; Stereo Configuration
tion, so that a low current, and hence low cost
switch, can be used for turn on/off.
Stability
The device is provided with an internal compen-
sation wich allows to reach low values of closed
loop gain.
In this way better performances on S/N ratio and
SVR can be obtained.
Figure 24: Mute Function Diagram
10/22