STM32F412XE Datasheet, PDF (6/193 Pages) STMicroelectronics – ARM-Cortex-M4 32b MCU+FPU, 125 DMIPS, 1MB Flash, 256KB RAM, USB OTG FS, 17 TIMs, 1 ADC, 17 comm. interfaces

List of tables
List of tables
STM32F412xE/G
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Table 6.
Table 7.
Table 8.
Table 9.
Table 10.
Table 11.
Table 12.
Table 13.
Table 14.
Table 15.
Table 16.
Table 17.
Table 18.
Table 19.
Table 20.
Table 21.
Table 22.
Table 23.
Table 24.
Table 25.
Table 26.
Table 27.
Table 28.
Table 29.
Table 30.
Table 31.
Table 32.
Table 33.
Table 34.
Table 35.
Table 36.
Table 37.
Table 38.
Table 39.
Table 40.
Table 41.
Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
STM32F412xE/G features and peripheral counts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Embedded bootloader interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Regulator ON/OFF and internal power supply supervisor availability. . . . . . . . . . . . . . . . . 31
Timer feature comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Comparison of I2C analog and digital filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
USART feature comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Legend/abbreviations used in the pinout table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
STM32F412xE/G pin definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
STM32F412xE/G alternate functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
STM32F412xE/G register boundary addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Voltage characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Current characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Thermal characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
General operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Features depending on the operating power supply range . . . . . . . . . . . . . . . . . . . . . . . . 78
VCAP_1/VCAP_2 operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Operating conditions at power-up / power-down (regulator ON) . . . . . . . . . . . . . . . . . . . . 79
Operating conditions at power-up / power-down (regulator OFF). . . . . . . . . . . . . . . . . . . . 80
Embedded reset and power control block characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 80
Typical and maximum current consumption, code with data processing (ART
accelerator disabled) running from SRAM - V_DD = 1.7 V . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Typical and maximum current consumption, code with data processing (ART
accelerator disabled) running from SRAM - V_DD = 3.6 V . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Typical and maximum current consumption in run mode, code with data processing
(ART accelerator enabled except prefetch) running from Flash memory- V_DD = 1.7 V . . . 84
Typical and maximum current consumption in run mode, code with data processing
(ART accelerator enabled except prefetch) running from Flash memory - V_DD = 3.6 V . . 85
Typical and maximum current consumption in run mode, code with data processing
(ART accelerator disabled) running from Flash memory - V_DD = 3.6 V. . . . . . . . . . . . . . . 86
Typical and maximum current consumption in run mode, code with data processing
(ART accelerator disabled) running from Flash memory - V_DD = 1.7 V. . . . . . . . . . . . . . . 87
Typical and maximum current consumption in run mode, code with data processing
(ART accelerator enabled with prefetch) running from Flash memory - V_DD = 3.6 V . . . . . 88
Typical and maximum current consumption in Sleep mode - V_DD = 3.6 V . . . . . . . . . . . . . 89
Typical and maximum current consumption in Sleep mode - V_DD = 1.7 V . . . . . . . . . . . . . 90
Typical and maximum current consumptions in Stop mode - V_DD = 1.7 V . . . . . . . . . . . . . 91
Typical and maximum current consumption in Stop mode - V_DD=3.6 V. . . . . . . . . . . . . . . 92
Typical and maximum current consumption in Standby mode - V_DD= 1.7 V . . . . . . . . . . . 92
Typical and maximum current consumption in Standby mode - V_DD= 3.6 V . . . . . . . . . . . 92
Typical and maximum current consumptions in V_BAT mode. . . . . . . . . . . . . . . . . . . . . . . . 93
Switching output I/O current consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Peripheral current consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Low-power mode wakeup timings⁽¹⁾ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
High-speed external user clock characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Low-speed external user clock characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
HSE 4-26 MHz oscillator characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
LSE oscillator characteristics (f_LSE = 32.768 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
6/193
DocID028087 Rev 4