STM8S003K3T6C Datasheet, PDF (56/100 Pages) STMicroelectronics – Value line, 16 MHz STM8S 8-bit MCU, 8 Kbytes Flash, 128 bytes data EEPROM, 10-bit ADC, 3 timers, UART, SPI, I²C

Electrical characteristics
STM8S003K3 STM8S003F3
Symbol Parameter
Conditions
Typ
Flash in power-down mode, HSI
clock after wakeup
4.5
(1) _{Data based on characterization results, not tested in production}
Max at 85
°C
Unit
(1)
17
9.3.2.5 Low power mode wakeup times
Symbol Parameter
Table 28: Wakeup times
Conditions
Typ _Max⁽¹⁾ Unit
Wakeup time from
t_WU(WFI) ^{wait mode to run}
mode⁽³⁾
0 to 16 MHz
f_CPU = f_MASTER = 16 MHz
See
note⁽²⁾
0.56
Wakeup time active MVR voltage
HSI
Flash in operating
halt mode to run
mode⁽³⁾
regulator
on⁽⁴⁾
mode⁽⁵⁾
(after
1⁽⁶⁾ 2⁽⁶⁾
wakeup)
Wakeup time active MVR voltage Flash in
HSI
halt mode to run
regulator power-down
(after
3⁽⁶⁾
mode⁽³⁾
on⁽⁴⁾
mode⁽⁵⁾
wakeup)
t_WU(AH)
μs
Wakeup time active MVR voltage
HSI
Flash in operating
halt mode to run
mode⁽³⁾
regulator
off⁽⁴⁾
mode⁽⁵⁾
(after
48⁽⁶⁾
wakeup)
t_WU(H)
Wakeup time active
halt mode to run
mode⁽³⁾
Wakeup time from
halt mode to run
mode⁽³⁾
MVR voltage Flash in
regulator
off⁽⁴⁾
power-down
mode⁽⁵⁾
Flash in operating mode⁽⁵⁾
Flash in power-down mode⁽⁵⁾
HSI
(after
50⁽⁶⁾
wakeup)
52
54
(1) _{Data guaranteed by design, not tested in production.}
(2) _{tWU(WFI) = 2 x 1/fmaster + x 1/fCPU.}
56/100
DocID018576 Rev 3