SPC560P34L1 Datasheet, PDF (56/103 Pages) STMicroelectronics – Programmable watchdog timer

Electrical characteristics
SPC560P34L1, SPC560P34L3, SPC560P40L1, SPC560P40L3
Table 15. Approved NPN ballast components
Part
Manufacturer
Approved derivatives⁽¹⁾
BC817
BCP56
Infineon
NXP
ST
Infineon
ON Semi
NXP
BC817-16; BC817-25; BC817SU
BC817-16; BC817-25
BCP56-16
BCP56-10; BCP56-16
BCP56-10
BCP56-10; BCP56-16
1. For automotive applications please check with the appropriate transistor vendor for automotive grade certification
Table 16. Voltage regulator electrical characteristics
Symbol
C
Parameter
Conditions
Value
Unit
Min Typ Max
V_{DD_LV_REGCOR}
C
C
Output voltage under
P maximum load run supply
current configuration
Post-trimming
1.15 — 1.32 V
C_DEC1
S
R
—
External decoupling/stability
ceramic capacitor
BJT from Table 15. Three
capacitors (i.e. X7R or X8R
capacitors) with nominal
19.5 30
—
µF
value of 10 µF
BJT BC817, one capacitance
of 22 µF
14.3
22
—
µF
R_REG
S
R
—
Resulting ESR of either one or
all three C_DEC1
Absolute maximum value
between 100 kHz and
10 MHz
— — 45 mΩ
C_DEC2
S
R
—
External decoupling/stability
ceramic capacitor
Four capacitances (i.e. X7R
or X8R capacitors) with
nominal value of 440 nF
120 176
00
—
nF
C_DEC3
L_Reg
S
R
External decoupling/stability
— ceramic capacitor on
VDD_HV_REG
Three capacitors (i.e. X7R or
X8R capacitors) with nominal
value of 10 µF; C_DEC3 has to 19.5 30
be equal or greater than
C_DEC1
S
R
—
Resulting ESL of V_{DD_HV_REG},
BCTRL and V_{DD_LV_CORx} pins
—
——
— µF
5 nH
56/103
Doc ID 16100 Rev 7