SPC560P34L1 Datasheet, PDF (1/103 Pages) STMicroelectronics – Programmable watchdog timer

SPC560P34L1, SPC560P34L3
SPC560P40L1, SPC560P40L3
32-bit Power Architecture^® based MCU with 320 KB Flash memory
and 20 KB RAM for automotive chassis and safety applications
Datasheet − production data
Features
■ Up to 64 MHz, single issue, 32-bit CPU core
complex (e200z0h)
– Compliant with Power Architecture^®
embedded category
– Variable Length Encoding (VLE)
■ Memory organization
– Up to 256 KB on-chip code flash memory
with ECC and erase/program controller
– Additional 64 (4 × 16) KB on-chip data
flash memory with ECC for EEPROM
emulation
– Up to 20 KB on-chip SRAM with ECC
■ Fail-safe protection
– Programmable watchdog timer
– Non-maskable interrupt
– Fault collection unit
■ Nexus Class 1 interface
■ Interrupts and events
– 16-channel eDMA controller
– 16 priority level controller
– Up to 25 external interrupts
– PIT implements four 32-bit timers
– 120 interrupts are routed via INTC
■ General purpose I/Os
– Individually programmable as input, output
or special function
– 37 on LQFP64
– 64 on LQFP100
■ 1 general purpose eTimer unit
– 6 timers each with up/down capabilities
– 16-bit resolution, cascadable counters
– Quadrature decode with rotation direction
flag
– Double buffer input capture and output
compare
LQFP100 (14 x 14 x 1.4 mm)
LQFP64 (10 x 10 x 1.4 mm)
■ Communications interfaces
– 2 LINFlex channels (1× Master/Slave, 1×
Master only)
– Up to 3 DSPI channels with automatic chip
select generation (up to 8/4/4 chip selects)
– Up to 2 FlexCAN interface (2.0B Active)
with 32 message buffers
– 1 safety port based on FlexCAN with 32
message buffers and up to 8 Mbit/s at
64 MHz capability usable as second CAN
when not used as safety port
■ One 10-bit analog-to-digital converter (ADC)
– Up to 16 input channels (16 on LQFP100 /
12 on LQFP64)
– Conversion time < 1 µs including sampling
time at full precision
– Programmable Cross Triggering Unit (CTU)
– 4 analog watchdogs with interrupt
capability
■ On-chip CAN/UART bootstrap loader with Boot
Assist Module (BAM)
■ 1 FlexPWM unit: 8 complementary or
independent outputs with ADC synchronization
signals
Table 1. Device summary
Package
Code flash memory
192 KB
256 KB
LQFP100 SPC560P34L3 SPC560P40L3
LQFP64 SPC560P34L1 SPC560P40L1
September 2013
This is information on a product in full production.
Doc ID 16100 Rev 7
1/103
www.st.com
1