STM8S005C6 Datasheet, PDF (54/97 Pages) STMicroelectronics – Extended instruction set

Electrical characteristics
STM8S005C6 STM8S005K6
Total current consumption and timing in forced reset state
Symbol
Table 28. Total current consumption and timing in forced reset state
Parameter
Conditions
Typ Max⁽¹⁾
I_DD(R)
Supply current in reset state ⁽²⁾
t_RESETBL
Reset release to bootloader vector
fetch
V_DD = 5 V
V_DD = 3.3 V
-
500
-
400
-
-
150
1. Data guaranteed by design, not tested in production.
2. Characterized with all I/Os tied to V_SS.
Unit
µA
µs
Current consumption of on-chip peripherals
Subject to general operating conditions for V_DD and T_A.
HSI internal RC/f_CPU = f_MASTER = 16 MHz.
Table 29. Peripheral current consumption
Symbol
Parameter
Typ.
Unit
I_DD(TIM1)
I_DD(TIM2)
I_DD(TIM3)
I_DD(TIM4)
I_DD(UART2)
I_DD(SPI)
I_DD(I2C)
I_DD(ADC1)
TIM1 supply current ⁽¹⁾
TIM2 supply current ⁽¹⁾
TIM3 timer supply current ⁽¹⁾
TIM4 timer supply current ⁽¹⁾
UART2 supply current ⁽²⁾
SPI supply current ⁽²⁾
I²C supply current ⁽²⁾
ADC1 supply current when converting ⁽³⁾
230
115
90
30
110
µA
45
65
955
1. Data based on a differential I_DD measurement between reset configuration and timer counter running at 
16 MHz. No IC/OC programmed (no I/O pads toggling). Not tested in production.
2. Data based on a differential I_DD measurement between the on-chip peripheral when kept under reset and
not clocked and the on-chip peripheral when clocked and not kept under reset. No I/O pads toggling. Not
tested in production.
3. Data based on a differential I_DD measurement between reset configuration and continuous A/D
conversions. Not tested in production.
54/97
DocID022186 Rev 4