STEF12 Datasheet, PDF (5/20 Pages) STMicroelectronics – Electronic fuse for 12 V line

STEF12
3
Maximum ratings
Maximum ratings
Table 3. Absolute maximum ratings
Symbol
Parameter
Value
Unit
Positive power supply voltage (steady state)
V_CC
Positive power supply voltage (max 100ms)
-0.3 to 18
V
-0.3 to 25
V_OUT/source (max 100ms)
I-Limit
(max 100ms)
-0.3 to Vcc+0.3
V
-0.3 to 25
V
En/Fault
-0.3 to 7
V
dv/dt
-0.3 to 7
V
T_op
Operating junction temperature range ⁽¹⁾
-40 to 125
°C
T_STG
Storage temperature range
-65 to 150
°C
T_LEAD
Lead temperature (soldering) 10 sec
260
°C
1. The thermal limit is set above the maximum thermal rating. It is not recommended to operate the device at temperatures
greater than the maximum ratings for extended periods of time.
Note:
Absolute maximum ratings are those values beyond which damage to the device may occur.
Functional operation under these conditions is not implied.
Table 4. Thermal data
Symbol
Parameter
R_thJA
R_thJC
Thermal resistance junction-ambient
Thermal resistance junction-case
Value
52.7
17.4
Unit
°C/W
°C/W
Table 5. ESD performance
Symbol
Parameter
ESD ESD protection
Test conditions
HBM
MM
CDM
Value
Unit
1
kV
200
V
500
V
Doc ID 019056 Rev 3
5/20