STB37N60DM2AG Datasheet, PDF (5/15 Pages) STMicroelectronics – Extremely low gate charge and input capacitance

STB37N60DM2AG
Symbol
ISD
ISDM⁽¹⁾
VSD⁽²⁾
trr
Qrr
IRRM
trr
Qrr
IRRM
Parameter
Table 8: Source-drain diode
Test conditions
Electrical characteristics
Min. Typ. Max. Unit
Source-drain current
-
28 A
Source-drain current
(pulsed)
-
112 A
Forward on voltage
Reverse recovery
time
Reverse recovery
charge
Reverse recovery
current
VGS = 0 V, ISD = 28 A
ISD = 28 A, di/dt = 100 A/µs,
VDD = 60 V (see Figure 16: "Test
circuit for inductive load
switching and diode recovery
times")
-
1.6 V
- 120
ns
- 572
nC
- 10.2
A
Reverse recovery
time
ISD = 28 A, di/dt = 100 A/µs,
- 215
ns
Reverse recovery
charge
VDD = 60 V, Tj = 150 °C (see
Figure 16: "Test circuit for
inductive load switching and
- 1.89
µC
Reverse recovery
current
diode recovery times")
- 17.7
A
Notes:
(1) _{Pulse width is limited by safe operating area.}
(2) _{Pulse test: pulse duration = 300 µs, duty cycle 1.5%.}
Symbol
V(BR)GSO
Table 9: Gate-source Zener diode
Parameter
Test conditions
Gate-source breakdown voltage IGS = ±250 µA, ID = 0 A
Min. Typ. Max. Unit
±30 -
-
V
The built-in back-to-back Zener diodes are specifically designed to enhance the ESD
performance of the device. The Zener voltage facilitates efficient and cost-effective device
integrity protection, thus eliminating the need for additional external componentry.
DocID028271 Rev 1
5/15