P-NUCLEO-USB001 Datasheet, PDF (5/7 Pages) STMicroelectronics – A power connector to interface with external power supply

P-NUCLEO-USB001
P-NUCLEO-USB001 system architecture
Note:
• USB re-enumeration capability: three different interfaces are supported on USB
– Virtual COM port^(a)
– Mass storage
– Debug port
• Supported by wide choice of Integrated Development Environments (IDEs) including
IAR^™, Keil^®, GCC-based IDEs
The NUCLEO-F072RB board included in the pack has a different configuration respect to
the default one. The differences are listed below:
• Solder bridges SB48, SB49, SB62, SB63 are closed
• Solder bridges SB13, SB14, SB15, SB21 are open
• 0 Ohm resistors R34, R36 are removed
a. For all the details refer to STM32 Nucleo pack for USB Type-C^™ and Power Delivery with the Nucleo-F072RB
board User manual (UM2050).
DocID029202 Rev 2
5/7
7